In terms of power, you can find keyboard amplifiers that start at around 20-watts of power and models that go up to 400-watts. The purpose of using a stereo configuration is to have distinct signals on each channel (left and right), to give a sense of perspective to our ears.įor example, a stereo configuration on some keyboard voices might reproduce the sounds in its intended sonic form (for example, lower notes a bit to the left of the sonic field and higher notes a bit to the right), or might have stereo effects like a ping pong delay.įor the purposes of practicing at home such a distinction may not be a big deal, but if you want to appreciate the sound of your keyboard in all its glory, a stereo setup will set you on your way. For example, if only one channel is functional because there are not enough input channels on your device, or other instruments are taking up the remaining channels. The same L/mono output should be used when a mono configuration is the only option available. Using stereo when the final output is mono can cause phasing problems since the two channels will be summed into a single output channel. That means using the L/mono output on your keyboard. If the final output on the chain is mono (a single speaker in a keyboard amp or PA) you should keep the entire signal chain in mono. Your keyboard will most likely have 2 mono outputs, which makes up a stereo configuration, (Labeled R and L for right and left). Most keyboard amps or PAs don’t have instrument level inputs and extra equipment is needed to get the right voltage level.Ĭonnecting an instrument or mic level signal (lower level) into a line level output will cause the volume and quality of the signal to be very low.
– Instrument Level: This level falls between line and mic levels and is mostly used by electric guitars and other types of analog instruments. Since it’s a lower level signal it often requires a pre-amp to bring the voltage to an appropriate level. Your keyboard amp or PA will probably offer a mic/line input which works for both signals so long as you flick the respective switch. As the name implies it is used by microphones. – Mic Level: This is the signal with the lowest voltage.
This means there’s no need for extra equipment to alter the voltage signal your keyboard sends to your monitor of choice. Your keyboard is most likely operating at line level and keyboard amplifiers, PAs and studio monitors will generally have line level inputs. – Line Level: This is the most important level since it’s what most of your audio equipment will use. The rule of thumb is to use the appropriate output voltage for each type of Input. These all refer to a specific voltage range. There are 3 main types of voltage signals that show up when looking at audio equipment. Developments in technology have made it possible for even the cheapest amps to retain the rich quality of sound that your kick-ass keyboard provides. Nowadays you can find plenty of options that will fit any budget limitations. Whatever the case, we have prepared a guide that will provide all the relevant information you need about external amplification. – You rehearse with a band and have to compete with high-wattage guitar amps and an inconsiderate drum player – You might start playing live at small venues that don’t offer a house PA system – You might be interested in an external amplifier because constant practice with headphones tires your ears, and built-in keyboard speakers tend to be of low quality
#Two worlds 3 players 1 keyboard upgrade#
While for some of you it may be an obvious decision to upgrade to an external speaker, and for others it may not seem much of a necessity, there are a few possibilities to consider when deciding if your keyboard requires an amp or not: Do you, as a Rockstar, beginner or hobbyist keyboard player, need external amplification?
0 kommentar(er)
